Parts

Parts for PowerMax Trolling Motor 2HP Model - 12V Lamp Panel / Part# 24001301

19.00 USD

Genuine Parts - QTY x 1

Parts for PowerMax Trolling Motor 2HP Model - 12V Lamp Panel / Part# 24001301

Parts for PowerMax Trolling Motor 3HP Model - 24V Brushless Motor (90cm,Black)/ Part#24001023

292.80 USD

Parts for PowerMax Trolling Motor 3HP Model - 24V Control-Casing (Black) / Part# 24001297

21.40 USD

Parts for PowerMax Trolling Motor 3HP Model - 24V Lamp Panel / Part# 24001213

19.00 USD

Portable Analog Manometer Air Pressure Gauge for Inflatable Boats

21.00 USD

A handy safety equipment helps to check the real time air pressure in the boat chambers and ensure the inflatable boat performs to specification.

Display mode: PSI or Bar

Pressure range: 0 to 23 psi (0 to 1.6 bar)

Built-in Halkey Roberts (HR) air valve adapter

No battery required

Two grooved O-rings included: 4 mm & 5 mm thickness

Protective shock absorbent rubber cap

Ergonomic handle 

Previous Version Soft Air Hose Kit for 80D and 80DB Electric Air Pump

Sold Out

Package

• 5FT reinforced air hose for high pressure inflation
• 2x O-ring with different thickness
• Reinforced hose-to-Pump adapter
• Reinforced Halkey-Roberts valve adapter

Operation Instructions

4) If the hose is damaged due to the hot air near the hose-to-pump connector, cut the damaged portion (approximate 2-inches) and use the new extra hose-to-pump connector.

5) To reinforce the hose after installing the new hose-to-pump adapter, use some electric tape to wrap the air hose for about 2 inches starting from the hose-to-pump connector side.

Seamax Air Valve with Sikaflex 291i Sealant Reinforement Package for Inflatable Boats

35.00 USD

Air Valve & Air Tight Reinforced Package:

- Halkey-Roberts type or Bravo type Air Valve for one set for Seamax inflatable boats in selected model years. This air valve cannot be compatible to all made or all Seamax models. 

- Sikaflex 291i marine sealant.3.5oz tune Unipack. When apply only the Sikaflex 291i (5-10g) on the thread surface of the valve before screw in. It can help the air valve to get perfect air tight but won't stick the valve parts together. Air valve can be opened again for service in the future.

General Instruction of Skiaflex 291i (100g pack):

Professional grade marine adhesive/sealant used by boat builders and yards to bond and bed boat components structurally. Fast strength build-up overnight. Use above and below the waterline. Comes with nozzle. All purpose adhesive sealant, bond to hull and structural members. Bedding compound, light bonding, fast-cure polyurethane sealant. 

If a partial unipack remains, you can simply squeeze the air out of the tube using the included tool, thereby extending the shelf life of opened product. Includes application nozzle and dispensing/storage tool

If you can't not find your valve tool or it was broken, you can use a Jaw Pliers to open your valve.

Seamax Heavy Duty Large Boat Fender in White

22.00 USD

Heavy duty boat fender designed for recreational and trailed boats in protected moorings. The finest utility boat fender on the market. Features a unique oval design that prevents the fender from rolling out of position.

Combines unsurpassed softness and superior strength to provide boaters with the maximum protection available from a utility fender. Color – marine white.

Fender Diameter after inflated: 7 inches; Length: 23 inches; Eye diameter: 3/4 inches; Rope length: 5 feet; Recommended inflation is 1 psi, Max 2 PSI; product tested at 10 PSI.

How to use - The most accurate way to setup the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight as your boat, in terms of fender dimensions and quantities, and use that as a guideline. Thank you.

Seamax New Carbon Fiber Adjustable SUP Paddle 65'-85' for Stand Up Paddle Board

Sold Out

• Benefit from Carbon Material Made Paddle- Blade is constructed with Carbon Fiber Reinforced Nylon composite by high temperature injection made, equip with pure 100% carbon fiber made telescope handle, ideally suited for applications where high specific stiffness, high specific strength and light weight( overall 1.6 lbs) is required.

• Solid Anti-Twist Design- Benefit by this new manufacturing standard, the paddle can have better Anti-Twist performance in higher thrust(Max 125 lbs), with this new paddle, you may have a tournament experience on your new SUP trip.

• Maintenance and Our Guarantee- Wash the paddle to get rid of sand and salt water after every use. Protect the coating of the handle shaft to keep it last. It is super durable and built to deliver years of fun. Seamax Marine provides all customer from USA and Canada with 1 year 100% satisfied guarantee. 

• Note and Parts Purchase- Best to have a paddle for backup if more than one paddle boards. Do not sue this paddle to push too hard from the rock or shallow bottom, it may cause the aluminum shaft handle bended if over Max thrust. Customer can contact Seamax for Parts purchase if damaged by mistake.

Seamax SUP Hand Pump Max 27 PSI for Paddle Board & Inflatable Boat

38.00 USD

- SUP Hand Pump

Fast action and easy to reach higher pressure. Capacity: 2200 cubic cm. Pressure: Max 27 PSI / 1.8 BAR. Built-in air pressure gauge and sand protection filter for long lasting inflator chamber 4.5ft air hose with HR adapter for Halkey Roberts, Bravo, and similar types of air valves; Light weight and reliable aluminum inflator shaft.  

Standard Bench Seat Brackets Set

15.00 USD

SUP Paddle with 3-Sections Adjustable Aluminum Shaft and Rigid Fiberglass Reinforced Nylon Blade

39.00 USD

Solid and Anti Corrosion – This 3-piece adjustable SUP paddle delivers a solid aluminum shaft with black anti-corrosion coating, a durable 30% fiber reinforced nylon composite blade that offering heavy use, human Engineering design top handle give you more comfortable when paddling. Product is also very light weight and good for entrance level user with affordable price.

Design and Dimensions - The overall paddle height range is 66" - 82" (168cm- 2.08cm) and come with a level reading on the shaft; Blade’s outer dimensions is approximately L-16" x W-8"; it is suitable for any brands of paddle boards and most popular for 9-12ft SUPs. This paddle can max hold 100Lbs thrust in the water; 2Lbs light weight is suitable for kids and adult;

Portable and Floatable - This is the 3-section portable SUP paddle, the telescope handle quick-release lock helps its easily length adjustment, and you can take just few seconds to assemble or break apart for keeping in the carrying bag. 2 of the 3 section can have a sealed chamber built-in the aluminum handle, with those 2-floatation compartments, you can always enjoy your water fun without lost the paddle by sinking into the water.

Maintenance and Our Guarantee – Wash the paddle to get rid of sand and salt water after every use. Protect the coating of the handle shaft to keep it last. It is super durable and built to deliver years of fun. Seamax Marine provides all customer from USA and Canada with 1 year 100% satisfied guarantee.

Anti-Twist Design with 100% Satisfaction Guarantee – Benefit by this new manufacturing standard, the paddle can have better Anti-Twist performance in higher thrust (Max 100Lbs), with this new paddle, you may have a tournament experience on your new SUP trip. And you have a 1-year complete replacement satisfied guarantee with Seamax.

Trolling Motor: 80A Circuit Breaker with Manual Reset for 12V and 24V DC Models

15.00 USD

80 Amp circuit breaker compatible with 12 Volt and 24 Volt systems.

Easy to use manual reset feature without replacing fuse

Protect DC electric trolling motor from electric damage. Stop surge damage.

Available mounting holes for easy installation

Dimension: 3" x 2" x 1-3/4"

Trolling Motor: 9.5" Screw for L-Series and X-Series 12V DC Models

15.00 USD

• 2 x 9.5" screw with one-time use rubber seals. 
• Suitable for Seamax L-Series and X-Series 12V Electric Trolling Motor

Trolling Motor: Carbon Brush Assembly for L-Series and X-Series 12V DC Models

35.00 USD

• Brushes Assembly with springs and screws
• Suitable for Seamax L-Series and X-Series 12V Electric Trolling Motor

NOTE: this parts is not suitable for Seamax SpeedMax (2018) and PowerMax (2019) model.

Trolling Motor: Lower Unit Rubber Seal for L-Series and X-Series 12V DC Models

15.00 USD

• Rubber Seal for lower unit 
• Suitable for Seamax L-Series and X-Series 12V Electric Trolling Motor

Trolling Motor: Quick Released Connector for Marine Battery Terminal, Suitable for 2018 & 40" Shaft Model

38.00 USD

Trolling Motor: Quick Released Extension Power Cord for Seamax 40" Shaft Models

45.00 USD