New features – Durable SUP PVC fabric with CNC made, Best size L10.8ft x W32”xT6”; built for lightweight and super rigid, max load 300Lbs person. Hot welded chamber seam with 3 years best industry guarantee, Idea for saltwater and freshwater recreational use. Package includes telescope SUP paddle, Hand Pump with air gauge, Leash, Backpack style carrying bag, and repair kit.
Easy to Setup - Pull your SUP out of its bag and un-fold it. Take the Fin and hook them into place making sure that the longer portion is going towards the end of the board. Once the Fins are in place, turn the board over so that the valve at the front of the board is facing up. The net weight of Seamax 10.8ft SUP is about 20Lbs, and all included when in the backpack is about 28Lbs
Inflation - Remove the cap from the valve and check to see if the stem in the center of the valve is up (sticking up out of the valve) or down (even with the inner rim of the valve). The stem of this valve must be in the up (inflate) position to inflate the SUP until 15PSI. FYI, all Seamax SUP is 20 PSI tested.
Deflation - To deflate and break down your SUP, just remove the valve cap and push in the valve stem turning it clockwise a quarter turn to lock it in the deflate position. Un-hook the Fins by pressing the Fin holders to close together and popping the Fins off. Roll the SUP up with the top side facing out (this will push out all of the air), and put it away in its bag
Care & Guarantee - To clean your SUP, just use a mild detergent and warm water. You should rinse your SUP off with fresh water after using it in saltwater. To ensure that your SUP lasts for years to come, do not store it in direct sunlight uncovered or in extremely hot or cold temperatures for long periods of time. Seamax Canada 1 year fully guarantee, plus 3 years for Seam and 5 years for fabric
Spec of Seamax SeaDancer Inflatable SUPRecreational SUP, suitable for Saltwater & Freshwater
SEAMAX Inflatable SUP are warranted to be free of defects in material and workmanship during the following prescribed warranty period. The SUP’ hull, all hull attachments and accessories, but not limited to, such as floorboards, D rings, oar safe rope, lifting handles, air valves, carrying bags, air pump are covered by this Limited Warranty for one (1) year. All the air holding fabrics seam structure are warranted against defects in material or workmanship that cause blistering and delaminating for three (3) years, and five (5) years for (PVC) fabrics.
1. Make sure that your SUP is fully inflated. It should be nearly rock hard and when standing on the SUP in the water and it should not bend. Your paddleboard may flex some with your weight, but it should not bend to the point of creating a crease.
2. If you are paddling in open water, such as a lake or the ocean, make sure that you use an ankle leash. If you are fall off, your board could be swept away from you, leaving you stranded. An ankle leash will keep this from happening.
3. If you are paddling a river, do not use an ankle leash. This could be very dangerous because if you fall off, your board could pull you under the water as it continues down the river. Also, an ankle leash could get caught on items under the water and pull you off of your board as you are riding down the river. 4. Be careful in windy conditions. Because you are completely above the water, strong winds can greatly affect you and could push you around.
5. Never leave your board, even if you lose your paddle. You can still paddle your board with your hands, which is easier than trying to swim back to shore. Also, if the wind was to pick up, your board will blow away from you faster than you can swim to it. This is why an ankle leash is so important.
6. Foot Position: You should stand in the middle of the board when paddling. When on flat water, stand with your feet about shoulder-width apart and face forward. If you are surfing or in choppy water, you want to take more of a surfer’s stance with your dominant foot facing forward. Your feet are not glued to the board, make sure to get used to moving your feet around on the board because the sooner that you do this the more comfortable you will feel about doing turns and riding waves.
7. The Best way to turn your board is to stand with your foot at the tail of the board with your weight over the fins. This is where foot movement will come in handy
Quick Instruction of using Dual Action Hand Pump - You should connect the Dual Action switch plug when first start. So you can work fast. You want to unplug the Double Action plug when pressure reach 5-8 PSI. So you can be easier for continued pumping. You may only want to check the air gauge when 10 PSI reached.
Many customers are the first time to use the hand pump with SUP. the spring-load type air gauge is built-in on the pump. Since the air gauge is very small, so it won’t be very sensitive especially when measuring low pressure. The air gauge best working range is 10-20 PSI for SUP purpose. When it working, the air pressure from SUP will need to be transferred via the long hose. You may start to see the air gauge moving when 2-3 PSI reached. This is normal.
If you stop pumping air too early, you won’t be able to see the air gauge moving. And since you worry about over-inflate the SUP and void the warranty. You may be worry about the air gauge. Actually our SUP is all 20 PSI tested and rated at 15 PSI. There is no record that only using our hand pump can blow out our SUP.
We want to give you some more information here and guide you how to qualify the air pressure in the SUP. First understand that the pump output pressure will be equal to the pressure in the SUP chamber. Your pushing down power will relate to the pump pressure output.