The Deluxe Boat Lauching Wheels system is designed and made by Seamax Marine. It is with well 3D design and made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. 12” air filled tire lab 1000Lbs tested, support MAX 600Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
Benefit from its new design - 4 stages of length & 4 wheel arm position, the dolly can be adjusted while afloat in the boat leaving or coming into, the dolly system can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel’s diameter, the range of length is 23-30 inches.
The wheel arm can have 60 or 90 degree locking position up and down. Free up more space on the top and side of the transom. Lower 60 degree position can let the wheels run at the same level as the prop; the result is to turn the dolly as your prop guard when at rocky beach.
The transom bracket installation area is about 8x3 inches, shorter transom bracket design can give more possibility of installation for all type of boats with different transom. User can install the brackets at water line top position, so the water won’t hit the screw holes. Two bottom collinear bolts give the bracket extra strength and stabilizes.
Triple heavy duty, triple quality! Product made by Seamax Canada with 2 years limited warranty. The Quick Operation Features of Deluxe Boat Dolly include: Spring load locking pin for wheel arm position adjustment; Solid spring load buttons for wheel arm length adjustment; Quick released lock pin for wheel arm and wheel bearing. 100% Customer Satisfied Guarantee!
ADJUSTABLE DESIGN: These wheels have 4 adjustment positions for length and angle to adjust the leg length, push in the spring loaded buttons on each side of the leg and either pull or push to lengthen or shorten. To adjust the leg angle, push down on the spring loaded bar near the top of the leg assembly and move the leg assembly to the desired location. To remove the leg assembly from the bracket, pull out the quick release pin located at the top of the leg assembly.
MAX LOAD: This dolly set is designed for boats with solid outboard transom, the length of the boat should be less than 16FT for easier moving. Total weight should not exceed 600 Lbs including boat, outboard and all accessories.
INSTALLATION: This dolly set should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 6 holes (5/16”) in the plywood transom for the mounting brackets (3 holes per bracket). It is very important to locate the position of the holes correctly (2 holes at lower position, 1 hole at upper position). Please check carefully including checking the wheel arm position before starting to drill any holes.
MAINTENANCE: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don’t store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket.
TIRE INFLATION: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
WARRANTY: Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets. Please return the product or parts to the retailer you purchased them from if there is a warranty issue. You may contact the retailer for technical