Demo Sale - Seamax AIR270 9.0 Feet Inflatable Boat with Light Weight Air Floor

  • Features

    Seamax AIR Series is the boat with Airmat floor. The Airmat floor material is made with the most advanced modern technology. It is made with two layers of fabric held together with thousands of polyester cross stitches. When inflated this type of floor becomes as rigid as a traditional hard floor. The advantage of this type of floor is that it is much lighter, absorbs bumps, resists tears and rolls up with the boat.

    Seamax Air Series boat is Made of Korean Boat PVC Material, comes with inflatable keel and a V bottom, Additional accessories include Life line, D Ring, Towing Ring, Towing Cable, Darin Valve, Oar Lock, Fuel Tank Fittings, Handles etc. Package also comes with Bench Seat, Carrying Bag, Aluminum Oars, Foot Pump, Repair Kit, and Spare Parts. The boat has many upgrades and warranty is up to 5 years. Contact seller if more questions.

    AIR270 Boat Spec: Beam 5.0ft, Overall length 8.9ft, Inner dimensions 2.4x6ft, Pontoon diameter 17 inches, 3 pontoon chambers, 1 Airmat chamber and 1 keel chamber; Boat weight 90Lbs. Max loading 822Lbs with 3 Passenger, Boat Rated 10HP motor and with 15” Short shaft transom.

    This demo sale has also included a set of boat launching wheel set. It have been use for a few time. and the boat is 2015 model.


  • Airmat Floor Technology

    Airmat floor is made up of two layers of fabric held together by thousands of polyester cross-stitches; when inflated to high pressure this air cushion becomes as rigid as a traditional floor. Airmat floor is much lighter and takes up less space. Soft to touch the Airmat floor absorbs bumps and resists tears. Airmat chamber max pressure can support 10 PSI. We suggest using Seamax Electric Air Pump.
  • Boat Assembly

    Inflatable Boat is not hard to assemble; it may take up to 1 hour at the first time. Before you pump the air chambers, please double check all valves and make sure they are at intake position. There is a push /or turn stick at the middle as the switch of the position. You also can use air valve tools to check all the air valves and make sure all screwed down enough.

    Clear a flat surface that is clean and free of sharp objects. Place the boat in the ground flat surface to start. You can put cardboard underneath or do it at the carpet. The boat has a Plywood Support for Airmat floor at the rear. Please place the support in right position before start. The rear support helps the floor to be flat and getting proper V Hull when boating.

    Pump the tube chamber until 40-60% full. Pumping air can help to open up the boat and you will be easier to place the Airmat floor in to right position, remember the plywood support must be face down.

    You can keep pumping the tube chambers one by one until 80%, double check the Airmat floor position again. Try push the floor in all angle to make sure all good. Then pump the tube chamber until full pressure, and the Airmat chamber, finally is the V-hull chamber.

Product Type: Seamax AIR Series