Parsun 6HP Portable 4 Stroke Outboard Motor, Tiller Handle, Built in Tank, Pull Start, Aluminum Prop

  • Features

    Tiller Handle & Pull Starter; 1.3L (0.35 US Gallon) integral fuel tank; Light weight: 60Lbs to 62Lbs; 1 cylinder OHV engine with 148 cc displacement; Full throttle 4500-5500rpm, Max output 6HP; Compression Ratio 8.9:1; Innovative CDI ignition system; Gear shift: Forward-Neutral-Reverse; Trim & tilt 4 positions with shallow drive; Vibration reduction system; Aluminum prop included.

    Spiral bevel gear more quietly, higher reduction ratios with longer life; High strength clutch gives more reliable and better performance; Bigger displacement 5% more power output; Use ball bearing and needle bearing for driver shaft better performance; Wet-sump, forced bath lubrication system protect the engine better;

    CDI Ignition for easy start in all conditions: idle speed will be down to 1200~1300rpm and fuel consumption will be reduced, more quiet at idle speed by such new system Easy operation with throttle, choke, recoil starter & stop switch; Low fuel consumption max 2.3L per hour, Ultra low emission with EPA approved;

    Parsun outboard motors had been PDI (Pre Delivery Inspection) before packed into the box and ship. Motor oil had been drained out for shipping. This motor use regular 4 stroke motor oil SAE 10W-30 . Please add motor oil & fill up with 94# gasoline before start the motor. Please keep the motor manual & packing for servicing the motor.

    Three years limited warranty applies to all new Parsun outboard motors that purchased from Parsun (USA) within Canada and the continental United States including Alaska and Hawaii. Please keep the motor packing for service. Note:  Seller won't deliver this motor to California address due to CARB.

    SPECIAL NOTICE TO BUYER: PARSUN MOTORS ARE ALL TESTED BEFORE BEING SHIPPED. PLEASE READ THE MANUAL BEFORE USE. LEG OIL IS FILLED. PLEASE ADD MOTOR OIL (10W-30 OR 5W-30) BEFORE TRYING TO START IT. HIGH GRADE (#91 OR UP) GASOLINE IS RECOMMENDED. CUSTOMERS WITH ANY QUESTIONS ABOUT THE MOTORS SHOULD CONTACT OUR SUPPORT TEAM 1877-907-7766. SHIPPING DAMAGE IS COVERED BY SELLER. PLEASE REPORT SHIPPING DAMAGE VIA EMAIL WITH PICTURES. ALL SALES ARE FINAL. RETURN ARE NOT ACCEPTED DUE TO MARINE SAFETY ISSUE.
  • Specifications

    Engine type: 4-stroke,1-cylinders, OHV
    Displacement: 148 cc
    Bore x Stroke mm (inches): 64.0×46.0 (2.52×1.8)
    Max output: 6HP / 4.4kw
    Full throttle RPM range: 4500~5500
    Ignition system: CDI
    Starting system: Manual
    Steering system: Tiller control
    Gear shift: Forward-Neutral-Reverse
    Gear ratio: 2.08 (27/13)
    Trim and tilt system: 4 positions/Shallow drive
    Max fuel consumption: 2.3 L/h
    Fuel tank capacity: 1.3 L
    Gear oil capacity: 100cc
    Dry weight: Short Shaft 60Lbs / 27kg, Long Shaft 62Lbs / 28kg
    Overall width: 15.4inches / 390mm
    Recommended boat transom height: Short Shaft 15 -16 inches, Long Shaft 20 - 22 inches
    Propeller: Aluminum - 3-7.8"x9"
    Alternator output: 12V DC* (optional)
    Recommended Oil: 10W-30 or 20W-40

Product Type: Four Stroke Motor