Over Pressure Relief Valve for Inflatable Boats - 4 styles to choose
27.00 USD - 35.00 USD
Air Valve Options & Air Tight Reinforced Sealant Package:
- Halkey-Roberts type or Bravo type Air Valve for one set for Seamax inflatable boats in selected model years. This air valve cannot be compatible to all made or all Seamax models.
- Sikaflex 291i or GE marine sealant. 3.5oz pack. When apply only the Sealant (5-10g) on the thread surface of the valve before screw in. It can help the air valve to get perfect air tight but won't stick the valve parts together. Air valve can be opened again for service in the future.
Air Valve Replacement Quick Instruction
To replace the air valve, you can first inflate the chamber to 3 PSI. First to loose the valve when chamber (Boat or SUP) inflated, use the valve winch to turn it by counter-clockwise, pressure down the tool by your another hand in case it slip out. You may turn it for about 1 round until spinning.
Lay down the chamber (Boat or SUP) on the flat floor, Manually deflate the chamber completely before you can unscrew the air valve out. You don’t need to change the valve seat that inside the chamber. At the mean time don’t let it fall into the chamber, otherwise it is hard to get it back to the original position.
Optional to add some silicone to air valve thread. Or if you used to have air leaking at the valve edge before and tight up the valve no help, then you should add some on to get it a better seal and fixed. If you add the silicone to your valve, we suggest to keep 24 hours before you next use. And chamber pressure best to keep 1 PSI after valve replaced.
Same way to screw in the air valve to the valve seat. First by hand until no more moving. Then you can use the valve winch to keep turning. Also holding the bottom tight via the chamber. Maybe you can turn 1 or 2 round until no more.
Inflate the chamber to 3 PSI. and you can keep using the winch to final turn it tight. You may be able turn half round or more until final tight.
When you turn the winch very hard, always remember use another hand to pressure it down toward the valve, the tool slip out from the valve may cause its teeth damage.
Use the 5% liquid soapy water to check the air leaking. Easy to use a water bottle and drill a pin hole (1/64”) on its cap as a DIY tool.
General Instruction of Sealant:
Professional grade marine adhesive/sealant used by boat builders and yards to bond and bed boat components structurally. Fast strength build-up overnight. Use above and below the waterline. Comes with nozzle. All purpose adhesive sealant, bond to hull and structural members. Bedding compound, light bonding, fast-cure polyurethane sealant.
If a partial unipack remains, you can simply squeeze the air out of the tube using the included tool, thereby extending the shelf life of opened product. Includes application nozzle and dispensing/storage tool
If you can't not find your valve tool or it was broken, you can use a Jaw Pliers to open your valve.