Overall length 12.5ft, beam 5.7ft, inner dimension L 9.0ft x W 2.8ft; Boat dry weight 210Lbs, carry 7 passengers, max. loading 1432Lbs; Pontoon diameter 17.5 inches, 5 pontoon chambers and 1 keel chamber, max. pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Short shaft 16”/ 82° & reinforced transom, max. 25HP motor, suggested 15-20HP.
New boat finished with 4 layers and triple overlapped chamber seam, double thermal welded structure with industry best 6 years guarantee.
Non-skid sectional aluminum floor system with side joiners; Fuel tank and battery box tie down fitting on the floor; transom motor motor pad and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, and marine sealant applied to resist leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 4 x heavy duty handles, Oar lock set installed, 2 position seat receiver.
This Ocean380T 12.5ft inflatable boat shipment has 2 packages and total weight about 270Lbs, Hull package dimensions are 50x27x16”, and Floor package dimensions are about 44x25x9”. If trailer is needed, you can check with EZ Load trailer website to locate a closest dealer in your area.
Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
SEAMAX OCEAN380T SPECIAL FEATURES 1
4 layers overlap seam finishing is the strongest seam construction standard in the inflatable boat industry. The 2 main chamber fabrics are real-bonded together with ½” overlapping. Extra seam tapes on both sides of chamber to reinforce the main seam. Overall thickness of the 4-layers chamber seam is 5mm in total. Our chamber seam technology gives the boat a longer life time comparing with many others.
SEAMAX OCEAN380T SPECIAL FEATURES 2
Seamax always focuses on high manufacturing standards. A rigid transom is very important for inflatable boats. Beside using solid birch plywood to build transom, we develop a new standard called Transom Stabilizer Reinforcement (TSR) to help the pontoon to disperse motor vibration and weight. The reinforcement technology extends the overall life time of the inflatable boat.
SEAMAX OCEAN380T SPECIAL FEATURES 3
Hull Stabilizer Bar (HSB) is designed by Seamax and first applied in an 18ft government boat project. Now Seamax HSB 2.0 is available on every Seamax Ocean T model. Located near the front deep V-Hull, the specially made HSB greatly helps stabilize the boat structure. The tension along the HSB creates an invisible force triangle to stabilize the front Hull and keep the floor in place. Such a triangle inner support for the hull is a great boat add-on feature. A boat with HSB also has a better high speed boating performance.