SUP
SUP20D PRO Double Stage 20PSI Electric Air Pump for Inflatable SUP and Boat, Intelligent Firmware with Built-in Temperature Sensor and Timer, Signature Edition
149.95 USD
-
Features
- Seamax SUP20D PRO Signature Edition air pump is an upgraded version in the SUP20 pumps family. Programmed intelligent proactive digital controller, voltage sensor, temperature sensor, and overheat protection for managed dual-stage inflation. Backlit LCD display and audible indicator to provide real-time working status to users. Major parts made of marine grade engineered ABS and Nylon material for durability. Low power consumption range 60-120W (0-20PSI). Wide range of working temperature and humidity. Regardless of daily use during the season or occasionally use in a year, this high-quality air pump can always do a good job.
-
2019 new Seamax version with firmware and hardware improvement, helps the pump working better in hard conditions, such as wide range product support, lower battery voltage or poor 12V socket connection. This new Seamax version also has built-in a smart monitoring feature, when the pump starts to inflate, the computer monitors the real-time pressure in every second, based on our Self-Developed smart pump formula, it can find the pump the best timing to switch to 2nd stage. The computer also monitors the pump internal temperature and continued working time, Auto Stop Protection feature has been built-in.
- 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Real-time pressure monitoring and auto-stop once selected pressure reached; High efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 - 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); accurateness 0.01 PSI.
- Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduction and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddleboard; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
-
Super lightweight 4Lbs and Dimension only 10”x7”x7” with easy carry handle; Reinforced 3.5ft air hose. Perfect handy size for pumping boats, SUPs, and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect airtight.
- The pump’s 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website.
Word Wide Buyer
Australia and New Zealand - visit www.amazon.com.au
UK and other Europe Countries - visit www.amazon.co.uk.
- Seamax SUP20D PRO Signature Edition air pump is an upgraded version in the SUP20 pumps family. Programmed intelligent proactive digital controller, voltage sensor, temperature sensor, and overheat protection for managed dual-stage inflation. Backlit LCD display and audible indicator to provide real-time working status to users. Major parts made of marine grade engineered ABS and Nylon material for durability. Low power consumption range 60-120W (0-20PSI). Wide range of working temperature and humidity. Regardless of daily use during the season or occasionally use in a year, this high-quality air pump can always do a good job.
-
Description
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord; Reinforced 3.5 FT Nylon type air hose suitable for high temperature and high-pressure use (Rated at 150°C (302°F) and 30PSI Max); Universal HR air valve adaptor and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
- This rapid double stage intelligent 12V DC electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure. The pump can auto-stop at your pre-set air pressure. It can auto-stop after max 20 minutes continuously working. So you will never over-inflate the chamber or damage the air pump.
- The valve connector with the hose is suitable for inflatable boats and SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves. This kind of air valve has a turning pin or pressing down pin at the middle to control the valve’s Open and Closed position. 3 silicon O-Rings to choose and keep the connection best airtight.
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord; Reinforced 3.5 FT Nylon type air hose suitable for high temperature and high-pressure use (Rated at 150°C (302°F) and 30PSI Max); Universal HR air valve adaptor and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
-
Specification
- Model: Seamax SUP20D- Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar)
- Digital Sensor Accuracy: 0.01 PSI
- Controller Method: Pre-programmed digital controller board
- Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage
- Pump Stage 1: Sealed and quiet turbo fan for high volume inflation
- Pump Stage 2: Engineered cylinder type compressor for high pressure
- Dual Inflators Switch Point: 0.65 PSI
- O Ring Thickness: 0.3mm / 0.5mm / 0.6mm
- Sand Filter: Dual filters for air intake and pump cooling
- Pump Working Voltage: 11-14V DC
- Max Energy Consumption: 10A, 120W (12V)
- DC Power Cord Length: 9ft (2.75m)
- Air Hose: 3.5ft Length & with HR Valve Adaptors
- Product Net Weight: 3.6 Lbs
Portable Lithium 12V 6AH External Power Supply for SUP Pump Max Output 200W
139.00 USD
-
Features
Special designed to operate with Seamax SUP20D and SUP20S 12V SUP electric air pump. A full capacity battery level can inflate 2 large inflatable SUPs up to 20PSI, or 4 mid size SUPs up to 16PSI when supporting the SUP20D pump, or fully charge 4 mobile devices, such as iPhone. If it is working with Seamax SUP20D or SUP20S electric air pump, it can support the pump to work for 30-40 minutes.
Promotion - SUP Pump & Lithium Battery Combine Order - Extra 10% Saving Discount Code "web10saving"
With Plug & Play design, power supply will be automatically waked up when electronic device or USB phone cable is connected, and will be automatically put in sleep in 2 minute after all devices are unplugged. Also great for outdoor use as it is compatible with most portable 12V electronic accessories used in car, such as GPS or tire inflator.
High quality PCB (Power Management Board) unit embedded with this 12V 6AH lithium battery, and built with internal fuse to protect the battery cell from electric circuit shortage. Fully supported to all Seamax SUP electric air pump.
Backlit LCD display with real-time power meter and port status indicators. Suitable for night time use with 3 x 1W built-in LED flash light with one-button easy operation. Along with anti-slip rubber coating and water resistant DC output socket, this portable power supply is an ideal gear for your outdoor sport activities.
Multiple DC ports with water resistant rubber caps:
- 1x 5V / 2A USB port for fast charging mobile devices.
- 1x 5V / 1A USB port for standard charging mobile devices.
- 1x 12V / 15A cigarette lighter style socket to power Seamax SUP
- 1x 12V / 1A charging port
Warranty: This product is guaranteed for one (1) year from purchase date within USA & Canada. The limited warranty only covers the defective factory parts under normal operating conditions. Seller has the right to refuse the warranty claim if the product shows excessive wear, abuse or misuse. Keep the original sales record and the label on the product for warranty service. Seller pays for two-way shipping fee if a warranty claim is within 60 days from the date of purchase. Buyer pays for one-way shipping fee if the warranty claim is after 60 days and within 180 days from date of purchase. Buyer pays for two-ways shipping fee if the warranty claim is over 180 days from the date of purchase. Please know the shipping cost claim is only available for USA lower 48 states and Canada. Contact the seller to obtain return authorization.
NOTE OF SHIPPING SERVICE, GROUND SHIPPING SERVICE ONLY, NO EXPRESS SERVICE FOR THIS ITEM WHEN CONTAINS LITHIUM ION BATTERY CELL. THANK YOU.
-
Specification
Battery Capacity:
MSDS certified Lithium Ion 6AH 11.1V
Total Max Output
200W (12V-180W + 5V-15W + LED 3x 1W)
Charger Standard
Input 110-240 AC / Output 5V & 12V DC
Battery Charging Time:
Max 6 hours to fully charged & auto stop
USB Charging Ports
Compatible with all 5V devices, 1A & 2A
Cigarette Lighter Output:
12V / Max 15A (Max 180W)
Product Dimension:
8 x 4.5 x 2 inches (L x W x H)
Item Net Weight:
1.8 pounds (800g)
Nylon Air Hose Kit for Seamax 20PSI SUP Electric Air Pump - 2 Version
37.00 USD
New or replacement air hose kit for Seamax SUP20S or SUP20D electric air pump
Hose Length: 3.3 Feet (1 Meter)
Pump connector - Screw in type 100% air tight
Version 1: Same standard as the pump package, Boat and SUP new style Halkey Roberts valve adapter Pre-installed. comes with one 5mm thickness O ring.
Version 2: With exchange-able fitting end for Multiple valve adaptors, As an upgrade kit for your SUP20S or SUP20D for multi--purpose. Traditional type HR adapter comes with 3mm thickness O ring.
Note: Seamax SUP pump comes with 3 different thickness O-rings in the package. 3mm, 5mm and 6mm. All O-rings are compatible with this air hose kit.
Version 2: Air Hose Kit with Multiple Valve Adapters
View full product details
Nylon Air Hose Kit for Seamax SUP20S/D Electric Air Pump to Fit Leafield C7 or D7 Valve (Version3)
38.00 USD
New air hose kit for Seamax SUP20S or SUP20D electric air pump, Only to fit the inflatable product with Leafield C7 & D7 air valve.
Seller modified the air hose kit by the original Leafield valve adaptor. please know other valve adaptors are not included for this modified kit.
Hose Length: 3.3 Feet (1 Meter)
Pump connector - Screw-in type 100% airtight
View full product details
SUP20S PRO Intelligent 20PSI Electric Air Pump for Inflatable SUP - Signature Edition
119.95 USD
-
Features
- NEW PRO FEATURES:
Pump Status Indicator with Display and Warning Beep Sound;
Voltage Working Range 9V-15V with Built-in Power Protection;
Built-in Temperature Sensor for Protect Against Overheating;
- Engineered in Canada at an affordable price; Major parts made of marine grade engineered ABS and Nylon material more durable. Low power consumption 5 - 10A (60 - 120W). Wide range of working temperature and humidity. Regardless of daily use during the season or occasionally use in a year, this quality pump always does a good job.
- This Seamax intelligent SUP20S electric air pump comes with a Digital pressure LCD screen. Designed for inflatable SUP and paddleboard etc. Supported working range 0.5 - 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); 15 minutes to fully inflate a 12ft SUP to 20 PSI. Max speed: 70L/min; Lightweight 3Lbs; Dimension 9”x5”x5”.
- Noise reduction single inflator with high sensitive intelligent pressure controller module, accurateness 0.01 PSI; Pressure setting increments 0.5 PSI; Real-time pressure monitoring, auto-stop once selected pressure reached. Built-in outtake chamber with one-way diaphragm valve for protection and better airtight.
-
Reinforced 3.5 FT Nylon type air hose suitable for high temperature and high-pressure use (Rated at 150°C (302°F) and 30PSI Max). Perfect handy size for pumping SUPs and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adapters provide perfect airtight. This design will avoid users’ complaints against poor quality leaky air hose issues and help this pump to last for many years.
- The pump’s 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website.
Word Wide Buyer
Australia and New Zealand - visit www.amazon.com.au
UK and other Europe Countries - visit www.amazon.co.uk
- NEW PRO FEATURES:
-
Description
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9 ft Power cord and 3.5 ft nylon air hose, Universal HR air valve adapter and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
- This intelligent 12V DC electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure. The pump can auto stop at the pre-set air pressure. It will auto stop after max 20 minutes of continuous working. So you will never over-inflate the chamber or damage the air pump.
- The valve connector with the hose is suitable for SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves. This kind of air valve has a turning pin or pressing down the pin in the middle to control the valve’s Open & Closed position. 3 silicon O-Rings to choose and keep the connection best airtight.
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9 ft Power cord and 3.5 ft nylon air hose, Universal HR air valve adapter and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
-
Specification
- Model: Seamax SUP20S
- Pump Support Rate: 0.5 - 20 PSI (0.034 - 1.378 Bar)
- Digital Sensor Accuracy: 0.01 PSI
- Controller Method: Pre-programmed digital controller board
- Max Pumping Speed: 70L/ min
- Single Stage: Engineered cylinder type compressor for high pressure
- O Ring Thickness: 0.3 mm/ 0.5 mm/ 0.6 mm
- Pump Working Voltage: 11-14V DC
- Max Energy Consumption: 10A, 120W (12V)
- Fuse type: 12A standard, spare fuse included
- DC Power Cord Length: 9 FT (2.75 m)
- Air Hose: 3.5 FT length & with HR Valve Adapters
- Pump Net Weight: 2.6 LBS
- Pump Dimensions: 9” x 5” x 5”
Seamax SeaDancer 108 Inflatable SUP Package, Dimensions L10'8ft x W32" x T6", 2 Color Available. Blue or Orange
549.00 USD
New features – Durable SUP PVC fabric with CNC made, Best size L10.8ft x W32”xT6”; built for light weight and super rigid, max load 300Lbs person. Hot welded chamber seam with 3 years best industry guarantee, Idea for saltwater and freshwater recreational use. Package includes telescope SUP paddle, Hand Pump with air gauge, Leash, Backpack style carrying bag and repair kit.
Easy to Setup - Pull your SUP out of its bag and un-fold it. Take the Fin and hook them into place making sure that the longer portion is going towards the end of the board. Once the Fins are in place, turn the board over so that the valve at the front of the board is facing up. The net weight of Seamax 10.8ft SUP is about 20Lbs, and all included when in the backpack is about 28Lbs.
Inflation - Remove the cap from the valve and check to see if the stem in the center of the valve is up (sticking up out of the valve) or down (even with the inner rim of the valve). The stem of this valve must be in the up (inflate) position to inflate the SUP until 15PSI. FYI, all Seamax SUP are 20 PSI tested.
Deflation - To deflate and break-down your SUP, just remove the valve cap and push in the valve stem turning it clockwise a quarter turn to lock it in the deflate position. Un-hook the Fins by pressing the Fin holders close together and popping the Fins off. Roll the SUP up with the top side facing out (this will push out all of the air), and put away in its bag.
Care & Guarantee - To clean your SUP, just use a mild detergent and warm water. You should rinse your SUP off with fresh water after using it in salt water. To ensure that your SUP lasts for years to come, do not store it in direct sunlight uncovered or in extremely hot or cold temperatures for long periods of time. Seamax Canada 1 year fully guarantee, plus 3 years for Seam and 5 years for fabric.
Paddling Basics Knowledge
- Make sure that your SUP is fully inflated. It should be nearly rock hard and when standing on the SUP in the water and it should not bend. Your paddle board may flex some with your weight, but it should not bend to the point of creating a crease.
- If you are paddling in open water, such as a lake or the ocean, make sure that you use an ankle leash. If you are falloff, your board could be swept away from you, leaving you stranded. An ankle leash will keep this from happening.
- If you are paddling a river, do not use an ankle leash. This could be very dangerous because if you fall off, your board could pull you under the water as it continues down the river. Also, an ankle leash could get caught on items under the water and pull you off of your board as you are riding down the river.
- Be careful in windy conditions. Because you are completely above the water, strong winds can greatly affect you and could push you around.
- Never leave your board, even if you lose your paddle. You can still paddle your board with your hands, which is easier than trying to swim back to shore. Also, if the wind was to pick up, your board will blow away from you faster than you can swim to it. This is why an ankle leash is so important.
- Foot Position: You should stand in the middle of the board when paddling. When on flat water, stand with your feet about shoulder width apart and face forward. If you are surfing or in choppy water, you want to take more of a surfer’s stance with your dominant foot facing forward. Your feet are not glued to the board, make sure to get used to moving your feet around on the board because the sooner that you do this the more comfortable you will feel about doing turns and riding waves.
- The Best way to turn your board is to stand with your foot at the tail of the board with your weight over the fins. This is where foot movement will come in handy.
Warranty
SEAMAX Inflatable SUP are warranted to be free of defects in material and workmanship during the following prescribed warranty period. The SUP’ hull, all hull attachments and accessories, but not limited to, such as floorboards, Drings, oar safe rope, lifting handles, air valves, carrying bags, air pump are covered by this Limited Warranty for one (1) year. All the air holding fabrics seam structure are warranted against defects in material or workmanship that cause blistering and delaminating for three (3) years, and five (5) years for (PVC) fabrics.
| Idea for | All-around recreational SUP Whitewater SUP Saltwater & Freshwater |
|---|---|
| Product Net Weight |
20Lbs (9KG) |
| Seam Type | Hot Welded Seam, 20 PSI Tested |
| Length | 10.8ft (3.3m) |
| Width | 32 inches (86cm) |
| Thickness | 6 inches (15cm ) |
| Max Passenger Load | 300Lbs (136Kg) |
| Air Chamber Volume | 378L (100 US Gal) |
| Fins | 2 Fixed +1 Removable |
| Carrying bag included | Yes |
| Paddle included | Yes |
| Hand Pump included | Yes |
| Repair Kit included | Yes |
Seamax Portable 12V SUP-16DB Electric Air Pump with Built-in Lithium Battery for Inflatable SUP, Kite and Inflatable Boat
229.95 USD
-
Features
- Originally NEW Seamax SUP 16DB Double Stage 12V air pump is a new model in Seamax pump family. Thanks to the intelligent control system and its newly designed power control unit, the air pump is great to use with the inflatable boat, SUP, and tent. This DC electric air pump can be powered by its built-in battery after charging or through a standard extremal 12V charger socket in a vehicle. It can quickly reach and automatically stop at the user pre-set air pressure. The deflation port helps to quickly deflate the air chamber for easy folding and compact size storage;
- With a built-in flash light and 2 USB charging ports, it can be used in the dark environment and conveniently helps to charge the mobile devices. It serves as an all-in-one solution for outdoor sports players. Pump user manual is included in the package and downloadable from our website
- This new Seamax version also has built-in a smart monitoring feature, when the pump starts to inflate, the computer monitors the real-time pressure in every second, based on our Self-Developed smart pump formula, it can find the pump the best timing to switch to 2nd The computer also monitors the pump internal temperature and continued working time, Auto Stop Protection feature has been built-in.
- 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 16PSI. Real-time pressure monitoring and auto-stop once selected pressure reached; Highly efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 - 16 PSI (16 PSI = 1.103 Bar =110 Kilo-Pascal); accurateness 0.01 PSI.
- Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduction and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddleboard; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
- Super lightweight 6lbs and Dimension only 10”x7”x7” with easy carry handle; Reinforced 3.5ft air hose. Perfect handy size for pumping boats, SUPs, and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect airtight.
Word Wide Buyer
Australia and New Zealand - visit www.amazon.com.au
UK and other Europe Countries - visit www.amazon.co.uk
- Description and Specification
- ADJUSTABLE DESIGN: Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9 ft Power cord and 3.5 ft nylon air hose, Universal HR air valve adapter and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
- This intelligent 12V DC electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure. The pump can auto stop at the pre-set air pressure. It will auto stop after max 20 minutes of continuous working. So you will never over-inflate the chamber or damage the air pump.
- The valve connector with the hose is suitable for SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves. This kind of air valve has a turning pin or pressing down the pin in the middle to control the valve’s Open & Closed position. 3 silicon O-Rings to choose and keep the connection best airtight.
|
Model |
SUP16DB |
|
Pump support rate |
0.5 to 16 PSI |
|
Digital sensor accuracy |
0.05 PSI |
|
2nd stage auto switch point |
0.45 – 0.6 PSI Real Time Monitoring |
|
Max pumping speed |
1st Stage 350L/m, 2nd stage 70L/m |
|
Stage 1 |
Sealed and quiet turbo fan for high volume inflation |
|
Stage 2 |
Engineered cylinder compressor for high pressure inflation |
|
Max energy consumption |
12A, 144W (12V) |
|
Pump working voltage |
11 - 14V DC |
|
Max continuous working time |
20 minutes |
|
Built-in battery |
6000mAh Lithium Ion |
|
Charger |
110 - 240V Travel Charger |
|
Controller |
Pre-programmed digital controller board |
|
DC power cord |
12 ft Length (3.75 m) |
|
Air hose |
5 ft Length & with HR Valve Adaptors |
|
O-Ring thickness |
0.3mm / 0.4-0.5mm double side/ 0.5-0.6mm double side |
|
USB port / LED light |
1A and 2A / 1A |
|
Fuse |
13A to 15A |
Detachable Board Fin for Seamax SeaDancer 108 Inflatable SUP
30.00 USD
- New features- This surfboard fin is made of high quality PVC material, tough and durable, not easy to damage.
- Easy to Setup-This fin is designed detachable with slide and lock fin box system, which comes with a fin dock to connect the board and fin, easy to install and remove.
- Note: This Fin only support for Seamax SeaDancer 108 Inflatable SUP
SUP Paddle with 3-Sections Adjustable Aluminum Shaft and Rigid Fiberglass Reinforced Nylon Blade
39.00 USD
Solid and Anti Corrosion – This 3-piece adjustable SUP paddle delivers a solid aluminum shaft with black anti-corrosion coating, a durable 30% fiber reinforced nylon composite blade that offering heavy use, human Engineering design top handle give you more comfortable when paddling. Product is also very light weight and good for entrance level user with affordable price.
Design and Dimensions - The overall paddle height range is 66" - 82" (168cm- 2.08cm) and come with a level reading on the shaft; Blade’s outer dimensions is approximately L-16" x W-8"; it is suitable for any brands of paddle boards and most popular for 9-12ft SUPs. This paddle can max hold 100Lbs thrust in the water; 2Lbs light weight is suitable for kids and adult;
Portable and Floatable - This is the 3-section portable SUP paddle, the telescope handle quick-release lock helps its easily length adjustment, and you can take just few seconds to assemble or break apart for keeping in the carrying bag. 2 of the 3 section can have a sealed chamber built-in the aluminum handle, with those 2-floatation compartments, you can always enjoy your water fun without lost the paddle by sinking into the water.
Maintenance and Our Guarantee – Wash the paddle to get rid of sand and salt water after every use. Protect the coating of the handle shaft to keep it last. It is super durable and built to deliver years of fun. Seamax Marine provides all customer from USA and Canada with 1 year 100% satisfied guarantee.
Anti-Twist Design with 100% Satisfaction Guarantee – Benefit by this new manufacturing standard, the paddle can have better Anti-Twist performance in higher thrust (Max 100Lbs), with this new paddle, you may have a tournament experience on your new SUP trip. And you have a 1-year complete replacement satisfied guarantee with Seamax.
View full product details
Seamax SUP20Max Double Stage 20PSI Electric Air Pump for Inflatable SUP and Boat, Intelligent Temperature Control with Auto & Manual Pumping Mode
Sold Out
-
Features
- Seamax SUP20Max air pump is an upgrade version of SUP20D. Their engine is same, hardware sensor is same, but we change the controller board and it will give you more convenience of use. At the mean time this new model will give you a brand new looking!
- This pump can provide a fully automatic mode or manual mode, the manual mode can let you either choose high volume 1st stage or high pressure 2nd stage. it will help you to use this pump on many other products, such as inflatable kayak or water sport towing tube. you will be more fixable to operate this electric air pump to inflate your toy.
- Programmed intelligent proactive digital controller, voltage sensor, temperature sensor, and overheat protection for managed dual-stage inflation. Backlit LCD display and audible indicator to provide real-time working status to users. Major parts made of marine grade engineered ABS and Nylon material for durability. Low power consumption range 60-120W (0-20PSI). Wide range of working temperature and humidity. Regardless of daily use during the season or occasionally use in a year, this high-quality air pump can always do a good job.
-
New Seamax version with firmware and hardware improvement, helps the pump working better in hard conditions, such as wide range product support, lower battery voltage or poor 12V socket connection. This new Seamax version also has built-in a smart monitoring feature, when the pump starts to inflate, the computer monitors the real-time pressure in every second, based on our Self-Developed smart pump formula, it can find the pump the best timing to switch to 2nd stage. The computer also monitors the pump internal temperature and continued working time, Auto Stop Protection feature has been built-in.
- 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Real-time pressure monitoring and auto-stop once selected pressure reached; High efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 - 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); accurateness 0.01 PSI.
- Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduction and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddleboard; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
-
Super lightweight 5Lbs and Dimension only 10”x8”x6” with easy carry handle; Reinforced 3.5ft air hose. Perfect handy size for pumping boats, SUPs, and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect airtight.
- The pump’s 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website.
Word Wide Buyer
Australia and New Zealand - visit www.amazon.com.au
UK and other Europe Countries - visit www.amazon.co.uk.
-
Description
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord; Reinforced 3.5 FT Nylon type air hose suitable for high temperature and high-pressure use (Rated at 150°C (302°F) and 30PSI Max); Universal HR air valve adaptor and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
- This rapid double stage intelligent 12V DC electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure. The pump can auto-stop at your pre-set air pressure. It can auto-stop after max 20 minutes continuously working. So you will never over-inflate the chamber or damage the air pump.
- The valve connector with the hose is suitable for inflatable boats and SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves. This kind of air valve has a turning pin or pressing down pin at the middle to control the valve’s Open and Closed position. 3 silicon O-Rings to choose and keep the connection best airtight.
- Easy to use backlit touch buttons and portable ergonomic handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord; Reinforced 3.5 FT Nylon type air hose suitable for high temperature and high-pressure use (Rated at 150°C (302°F) and 30PSI Max); Universal HR air valve adaptor and 3 silicone O-Rings with different thickness can fit all inflatable SUPs. Noise reduction inflators for quiet operation.
-
Specification
- Model: Seamax SUP20Max- Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar)
- Digital Sensor Accuracy: 0.01 PSI
- Controller Method: Pre-programmed digital controller board
- Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage
- Pump Stage 1: Sealed and quiet turbo fan for high volume inflation
- Pump Stage 2: Engineered cylinder type compressor for high pressure
- Dual Inflators Switch Point: 0.65 PSI
- O Ring Thickness: 0.3mm / 0.5mm / 0.6mm
- Sand Filter: Dual filters for air intake and pump cooling
- Pump Working Voltage: 10-14V DC
- Max Energy Consumption: 10A, 120W (12V)
- DC Power Cord Length: 9ft (2.75m)
- Air Hose: 3.5ft Length & with HR Valve Adaptors
- Product Net Weight: 4 Lbs
Seamax New Carbon Fiber Adjustable SUP Paddle 65'-85' for Stand Up Paddle Board
Sold Out
- Benefit from Carbon Material Made Paddle- Blade is constructed with Carbon Fiber Reinforced Nylon composite by high temperature injection made, equip with pure 100% carbon fiber made telescope handle, ideally suited for applications where high specific stiffness, high specific strength and light weight( overall 1.6 lbs) is required.
- Solid Anti-Twist Design- Benefit by this new manufacturing standard, the paddle can have better Anti-Twist performance in higher thrust(Max 125 lbs), with this new paddle, you may have a tournament experience on your new SUP trip.
- Maintenance and Our Guarantee- Wash the paddle to get rid of sand and salt water after every use. Protect the coating of the handle shaft to keep it last. It is super durable and built to deliver years of fun. Seamax Marine provides all customer from USA and Canada with 1 year 100% satisfied guarantee.
- Note and Parts Purchase- Best to have a paddle for backup if more than one paddle boards. Do not sue this paddle to push too hard from the rock or shallow bottom, it may cause the aluminum shaft handle bended if over Max thrust. Customer can contact Seamax for Parts purchase if damaged by mistake.