Seamax Pro OceanT Hypalon Commercial Grade Inflatable Boat, with Heavy Duty Alumium Floor (Boat Only)

SPECIFICATIONS

OCEAN 500T Hypalon (ORCA) - Boat Only
Length 16.5Ft, Beam 7.2Ft, Dry Weight 450Lbs
Max 15 passengers and 50HP rated

OCEAN 530T Hypalon (ORCA) - Boat Only
Length 17.5Ft, Beam 7.2Ft, Dry Weight 500Lbs
Max 15 passengers and 50HP rated

OCEAN 600T Hypalon (ORCA) - Boat Only
Length 19.5Ft, Beam 7.2Ft, Dry Weight 580Lbs
Max 18 passengers and 60HP rated


5 pontoon chambers and 1 keel chamber, Chambers with Hypalon 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Long shaft 21”/ 82°, reinforced transom. 

Non-skid sectional heavy duty aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 6 x heavy duty handles, Oar lock set installed, 3 position seat receiver.2x bench seats, 2 aluminum oars, 2 heavy duty boat carrying bags (for hull & floorboard); foot pump, boat repair kit & spare parts. Reflective Plates (optional) - US Coast Guard Approved 3M Reflective Sheeting; Color Code: White USCGFP30 (Sliver); Dimension 3”x10” / 9 Pcs.

Heavy boat and only put on the boat trailer to carry. if your trailer is needed, then you can check with EZ Load trailer website to locate a closest dealer in your area (https://m.youtube.com/watch?v=lkokVbuuQEc ).

FEATURES

Commercial grade Hypalon boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.SEAMAX OCEAN T SPECIAL FEATURES 14 layers overlap seam finishing is the strongest seam construction standard in the inflatable boat industry. The 2 main chamber fabrics are real-bonded together with ½” overlapping. Extra seam tapes on both sides of chamber to reinforce the main seam. Overall thickness of the 4-layers chamber seam is 5mm in total. Our chamber seam technology may give the boat a double life time comparing with many others.SEAMAX OCEAN T SPECIAL FEATURES 2Seamax always focuses on high manufacturing standards. A rigid transom is very important for inflatable boats. Beside using solid birch plywood to build transom, we develop a new standard called Transom Stabilizer Reinforcement (TSR). TSR will help the pontoon disperse motor vibration and weight. The reinforcement technology will extend the overall life time of the inflatable boat.SEAMAX OCEAN T SPECIAL FEATURES 3Hull Stabilizer Bar (HSB) is designed by Seamax and first applied in an 18ft government boat project. Now Seamax HSB 2nd version is available on every Seamax Ocean T model boat. Located near the front deep V-Hull, the specially made HSB greatly helps stabilize the boat structure. The tension along the HSB creates an invisible force triangle to stabilize the front Hull and keep the floor in place. Such a triangle inner support for the hull is a great boat add-on feature. Also, a boat with HSB should have better high speed boating performance.