Overall length 14ft, beam 6.2ft, inner dimensions L9.6ft x W3ft, pontoon diameter 19.7 inches; 5 pontoon chambers and 1 keel chamber for V hull; max pressure 3.6PSI (25kPa); boat dry weight 230Lbs. Max loading 1800 lbs, 9 passengers. Boat max-rated 35HP motor with 15” Short shaft transom. Red and Dark Gray colours to choose from.
The new boat is finished with double thermal welded chamber seams & double overlapped, this structure can help the boat last much longer and comes with 5 years guarantee.
Marine Grade PVC coating fabric for pontoon construction; Thicker 1.2mm material for the entire boat bottom. Heavy-duty lifeline around the entire boat. Secondary lifeline on the inside of the boat; Marine-grade 1.5" thick birch plywood transom; Heavy-duty rubbing strake around the boat and keel bottom.
Aluminum bench seat(s). Aluminum oars. Heavy-duty boat hull and floor carrying bags. Front towing line. Foot pump, repair kit and spare parts kit.
Edmonton Dealer Contact: Europa Canopy and Marine Tel: 780-237-9757 Address: 15915 - 116 Ave NW, Edmonton, AB T5M 3W1.
Features
Non-skid sectional aluminum floor or lightweight high-pressure airmat. Transom motor pad and pull-up style drain valve. Reinforced transom to pontoon adaptor. Pre-installed multiple utility D-ring patches. 3x front towing rings. 2x transom towing rings. 4x tie-down style handles. Oar lock set installed.
EASY TO GO
Easy to set up. This recreational inflatable boat will take you for a fun day of exploration at the bay, river or lake. It will take you there, away from the water's edge and closer to the fish. If you like to spend weekends being closer to nature, then an inflatable boat is for you. If you have an RV or go camping, most likely you will be near the water. An inflatable boat will be your best choice to have.
Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.
This HD430 14 ft inflatable boat shipment has 2 packages and total shipping weight about 290Lbs, Hull package dimensions are 53x28x17”, and Floor package dimensions are about 47x27x11”. If boat trailer is needed, you can check with EZ Load trailer website to locate the closest dealer in your area.
STABLE
Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.
QUALITY STANDARD
Seamax Boats have Exceptional quality workmanship that is unmatched by most other boats. All models are registered with Transport Canada and follow the Small Vessel Manufacturer Standard to build, Seamax boats are also recognized by US Coast Guard & DMV Office.
About Seamax Air Chamber Seams
When we talking about the latest air chamber seam standard, Hot (Air) Welded and Thermo Bonded are belong to the same type of seam processing. The main chamber seam staying together is not longer using the PVC glue. So the air chamber seam won’t be damaged when time being or daily use, Since the PVC glue life time is 3-10 years based on workmanship and condition of use. Hot welded (or Thermo welded) seam may reduce over 50% of boat major repair service and be able to extend the boat life time to be over 10-15 years.
Seamax has been making our Ocean Series and Ocean T Series inflatable boat with hot welded seam since 2017. And we use the over-lapped major seam structure let the chamber fabric staying together by themselves and not using an additional seam tape. Seamax still use seam tape as add-on with best result. It seems like we give the boat an extra welded seam, and we call it Double Hot Welded.
The PVC boat industry standard is joined chamber seam, I believe it should give a higher chance of air leaking after finished. Usually the same style over-lapped major seam structure can be found from high-end Hypalon boats. Boat using over-lapped seam will use more material to build and many extra hours. At the mean time it requires better skill worker to make it right. Now we can be confident to tell that our chamber seam’s life time will be as the same as the fabric’s life time. In the other word, when the day the boat life time ended, it should not be from the chamber seam issue.
Right now, all our Seamax boats manufacturing are the same. Hot welded seam for PVC boat brings the boat overall quality much closer to Hypalon boat. And Seamax boat with German PVC to build can bring Seamax with a highest standard in the inflatable boat industry.