Your Cart is Empty
inflatable boats
Seamax Portable Electric Air Pump 1 - 8.5 PSI for Inflatable Boats and Inflatable Kites (with Built-in 7AH Rechargeable Battery) - Used Like New
225.00 USD
-
Specifications
Turbo Fan Stage: Max Pump Air 500L per Minute
Dual Cylinder Stage: Max Working Pressure 60 Kpa (8.5 PSI)
Digital Air Gauge. Built-in 12V/7AH battery with 110V-240V Smart Charger.
Air Host Kit.
Max 45 Minutes Working Time per Battery Charging
Pressure Setting from 1PSI, Increment per 1 KPA (0.15PSI)
Multiple Valve Adapters, Digital Control and Real Time Monitoring, Auto Shuts Off when Set Pressure Achieved
LCD Back Light, Carrying Bag, Support Intake & Outtake (Inflate & Deflate) Dual Actions.
Additional Information
This pump is suitable for the products that are using the Boston type, HR (Halkey-Roberts), Bravo or similar type air valve, Leafield valve etc. This kind of air valve has a turning pin at the middle to control the valve’s Open & Closed position. There are universal valve adapters supplied with the pump to fit it. We have the Pump in Kite version, Please know the Kite version pump also good for Inflatable boats and all application same as the regular pump version.
The inflator operates in two stages which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine to piston automatically. If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t turn on.
Use for Deflation - You can use it to deflate the same chamber too. Attach the yellow hose onto the deflation side of the inflator (round outlet with notches). Attach the other end to the chamber you wish to deflate. -
Features
Supported Air Valves - This pump is suitable for the products that are using the HR (Halkey-Roberts), Bravo or similar type air valve. This kind of air valve has a turning pin at the middle to control the valve’s Open & Closed position. There are universal valve adapters supplied with the pump to fit it. This Pump is the Kite version, Please know the Kite version pump is also good for Inflatable boats and all application same as the regular pump version.
About this pump - Turn on the POWER switch and enter the maximum desired pressure by using the Set Pressure buttons, the set pressure will be shown on the right hand side of LCD screen. (10KPa = 100mbr = 1.45 PSI). Factory default working pressure is set as 25KPa (3.6 PSI).This pressure is suitable for most inflatable boats.
Use as a Deflator - You can use it to deflate the same chamber too. Attach the yellow hose onto the deflation side of the inflator (round outlet with notches). Attach the other end to the chamber you wish to deflate.
Built-in Battery - 80DB model has a built-in battery and travel charger. The type of this battery is 12V gel battery, lead acid type, battery capacity 7AH to support max 45 minutes working time. The battery will have up to 500 Cycles and 8 years life time if you can follow this maintenance manual. The charger is 110/240V travel type with double charging procedures. When you plug in the charge and connect with the pump, a red light showing on the charger can indicate the battery charging. The max charging current is 1A from the charger.
Using the Pump Min set pressure is 1 PSI (8Kpa), if you only need lower pressure than 1 PSI, you can keep monitoring the screen pressure reading and stop the pump manually. Press the POWER button to start. During inflation, the left hand side of LCD screen should show the pressure that the pump has reached. As soon as the entered pressure has been reached, the inflator turns off automatically. And the inflator can be turned off at any time by pressing the POWER button again. Take off the air hose from the chamber once the pump stops pumping. It is possible to stop the inflator at any time by pressing the (OFF) switch.
The inflator operates in two stages which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine to piston automatically. If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t turn on. -
Warranty
For recreational use, the electrical control boards, motor, charger are guaranteed for 2 years. Battery, air hose, valve adapters and carrying bag are guaranteed for 6 months. Warranty for commercial use is limited to six months from purchase date, and 90 days warranty for battery.