Overall length 12.5ft, beam 5.5ft, inner dimensions L8.7ft x W2.6ft, pontoon diameter 17.5 inches; 5 pontoon chambers and 1 keel chamber, max pressure 3.6PSI (25kPa); Hypalon type 4 layers overlapped seam; Well finished V hull; Boat dry weight 176Lbs. Max loading 1223Lbs, 5 passenger boat rated 25HP motor, 15” short shaft transom; Heavy duty aluminum floor; Red and Dark Gray color to choose.
New boat finished with 4 layers & triple overlapped chamber seam, double thermal welded structure with industry best 6 years guarantee.
Marine Grade PVC coating fabric for boat construction; Thicker 1.2mm material for entire boat bottom, Seamax developed reinforcement design for keel, transom underneath & pontoon bottom. Heavy duty life line around the entire boat, secondary life line on the inside of the boat; Heavy duty rubbing strake around the boat and keel bottom; Solid 1.5" thick transom made by top grade marine birch plywood.
This Ocean380 12.5 ft inflatable boat shipment has 2 packages and total shipping weight about 220Lbs, Hull package dimensions are 50x25x15”, and Floor package dimensions are about 41x25x9”. If boat trailer is needed, you can check with EZ Load trailer website to locate a closest dealer in your area.
Seamax is a dedicated manufacturer of Seamax inflatable boats. The Seamax Ocean series are using highest construction standards while being built. Ocean series can offer great performance for fishing, hunting and commercial applications. The boat is heavy duty and offers great value for the money.
Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Transom motor pad and pull-up style drain valve on the transom; Transom to pontoon adaptor fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings; 2 x transom towing rings, 4 x tie-down style handles, Oar lock set installed.
EASY TO GO
Easy to set up, our Heavy Duty inflatable boats will take you for a fun day of exploration at the bay, river or lake. Once deflated, it can be easily stored in your mini van or pickup truck. Inflatable boats will take you there, away from the waters edge and closer to the fish. If you like to spend weekends being closer to nature, then an inflatable boat is for you. If you have an RV or go camping, most likely you will be by the water. Take an inflatable boat with you.
Once deflated and folded, SEAMAX inflatable boat takes up about as much space as a medium bag. You can store it in the trunk of a car, locker, under the stairs or in the corner of the garage, ready for the next weekend or holiday.
Being an inflatable, SEAMAX Boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising, SEAMAX inflatable boats are always stable. You can stand up when fishing, children are safe, and mooring is simple. Seamax is great as a family boat.
Seamax Boats have Exceptional quality workmanship that is unmatched by most other boats. All models are registered with Transport Canada, and Recognized by US Coast Guard & DMV Office.
About Seamax Air Chamber Seams
When we talking about the latest air chamber seam standard, Hot (Air) Welded and Thermo Bonded are belong to the same type of seam processing. The main chamber seam staying together is not longer using the PVC glue. So the air chamber seam won’t be damaged when time being or daily use, Since the PVC glue life time is 3-10 years based on workmanship and condition of use. Hot welded (or Thermo welded) seam may reduce over 50% of boat major repair service and be able to extend the boat life time to be over 10-15 years.
Seamax has been making our Ocean Series and Ocean T Series inflatable boat with hot welded seam since 2017. And we use the over-lapped major seam structure let the chamber fabric staying together by themselves and not using an additional seam tape. Seamax still use seam tape as add-on with best result. It seems like we give the boat an extra welded seam, and we call it Double Hot Welded.
The PVC boat industry standard is joined chamber seam, I believe it should give a higher chance of air leaking after finished. Usually the same style over-lapped major seam structure can be found from high-end Hypalon boats. Boat using over-lapped seam will use more material to build and many extra hours. At the mean time it requires better skill worker to make it right. Now we can be confident to tell that our chamber seam’s life time will be as the same as the fabric’s life time. In the other word, when the day the boat life time ended, it should not be from the chamber seam issue.
Right now, all our Seamax boats manufacturing are the same. Hot welded seam for PVC boat brings the boat overall quality much closer to Hypalon boat. And Seamax boat with German PVC to build can bring Seamax with a highest standard in the inflatable boat industry.